2U 8-bay SAS-to-SAS/SATA Rackmount RAID Enclosure - JAD08-R2SN70

Double click on above image to view full picture

Zoom Out
Zoom In
More Views
  • 2U 8-bay SAS-to-SAS/SATA Rackmount RAID Enclosure - JAD08-R2SN70
  • 2U 8-bay SAS-to-SAS/SATA Rackmount RAID Enclosure - JAD08-R2SN70
  • 2U 8-bay SAS-to-SAS/SATA Rackmount RAID Enclosure - JAD08-R2SN70
  • 2U 8-bay SAS-to-SAS/SATA Rackmount RAID Enclosure - JAD08-R2SN70


Availability: In stock

Add Items to Cart
Quick Overview
  • 2U 8-bay 4G SAS-to-SAS/SATA rackmount raid system
  • Single SAS expandable port
  • 300W redundant power supply
Product Description



  • 2U 8-Bay SAS-to-SAS/SATA Rackmount RAID Enclosure
  • Hybrid SAS & SATA based disk storage system
  • Storage expansion through RS16 JS system
  • Comprehensive RAID levels: 0, 1, 3, 5, 6, 10, 30, 50, 60
  • Multiple RAID levels and stripe sizes per disk volume
  • Supports multiple RAID volume & instant availability
  • Optional remote monitoring and management over TCP




Form Factor2U low profile 19" rackmount 8 SAS/SATA disk drive bays
System ArchitectureSAS-to-SAS (Serial Attached SCSI)
Dual channel (2) SAS ports
Single (1) SAS expandable port
Disk Drive InterfaceHDD: SAS (Serial Attached SCSI)
SATA (Serial ATA 1.5Gb/s or 3Gb/s)
RPM: 7200-10,000 for SATA disk, 15k for SAS disk
Controller ArchitectureDedicated RAID processor
Dual PCI bus architecture
64-bit 133MHz PCI-X bridge
1GB cache (upgradeable to 2GB)
Upgradeable firmware in flash ROM
Controls and IndicatorsBacklit LCD control panel
Power and drive failure indicators
Built-in alarm with mute button
RAID OperationRAID level 0 ( 0+1 ), 3, 5, 6 and JBOD
Multiple array support (up to 8 separate arrays)
Hot-swap drive support
Hot/global spare drive support
Online capacity expansion
ManagementUser configurable via control panel
Web browser remote management
RS232 VT100 ANSI terminal emulation
Event & fault notification to e-mail
Enclosure SpecificationHot-Swappability 8 x Removable HDD Tray
Drive Failure 8 x LED Indicator for each HDD
System Fan 3 hot-swappable blowers
Status LEDs 1 x access LED for each HDD
Fan-fail LED 1 x fan-fail LED for system
Mute Button 1 x mute button for fan & temp alarm
Dimension (H x W x D) 3.5" x 17" x 20.5"
Weight (without disk) 45 Lbs
Physical & EnvironmentTemperature built in thermal & fan sensor
Operating Temperature 10C ~ 35C
Non-Operating Temperature -10C ~ 50C
Operating Humidity 20% to 90% non-condensing
Supported Operating SystemWindows 98/98SE, 2000, XP, 2003, Vista, 2008
Mac 9.1 and above Linux (all latest builds)
And all other systems
Power SupplyDual redundant removable power modules
1+1 hot swappable
AC input: 90 ~ 264 VAC, 47Hz ~ 63Hz
Continuous output power: 300W
CoolingThree hot swappable fan modules
DNI BFB0712H brushless blowers
12V DC, 0.36A, 3-pin connector

* Price is subject to change without notice